Aviramp aircraft passenger boarding ramps and portable Jet Bridges

1

Domestic Model

Domestic aviramp_extension_

The standard domestic model does not usually have an aircraft docking platform unless requested as it is generally used as a direct walkway into smaller aircraft

Aircraft boarding_ramp_for_small_aircraft_

Where aircraft have factory fitted stairs, an extendible ramp is available to bridge across the stairs in between the handrails to form a clear walkway directly into the cabin door.

 

This extension ramp is 1.8 metres long and depending on the clients requirements, the width can be either 0.520m or 0.750m wide. Accurate positioning of the Aviramp against the aircraft is not mandatory as the extension ramp is free to move.


Aircraft boarding_ramp_for_SaabThis ramp is designed to service aircraft such as Dash, CRJ family, Saab, 146 etc, with an aircraft door height range of 1 metre up to 1.9 metres.
With a footprint similar to that of a family saloon car (2.95 metres wide x 5.5 metres long) this unit requires minimal storage space.
 
This model can be operated  with the assistance of solar power or can be fully aircraft boarding_ramp_for_FD_80_powered as detailed on our technical page.
The Domestic model (above) is our display model at our Telford, UK headquarters.

 Aviramp® is a registered trademark.
 International Patent Pending PCT/GB2011/050514    GCC17974/2011